Japanese Woodworking

The video showcases the construction of a Japanese-inspired breakfast bar and pony wall in a modern open kitchen. The carpenter, Shoyan, builds an L-shaped pony wall, installs drywall, and then constructs the breakfast bar using ash wood. He emphasizes safety by rounding edges and meticulously hides screws with wooden plugs for a clean finish. The video concludes with the completion of the breakfast bar and a small niche in the front wall, highlighting how the addition enhances the kitchen's versatility and luxury.

This episode focuses on installing jamb extensions for windows, sliding doors, and the kitchen ceiling. The builder uses solid wood planks, carefully measuring and cutting them to fit the uneven floor and existing structures. They also install a drop bulkhead for the kitchen ceiling, which will be covered with cedar planks.

Shoyan, a Japanese carpenter, builds traditional fall prevention pony walls and a long, versatile ash wood counter using classic carpentry techniques like chisel sharpening and mortise and tenon joints. He details the construction of the pony walls with a camoy-style timber and a seamless trim, and meticulously crafts the counter, ensuring its durability with hidden support brackets. The completed project creates bright, functional spaces in the home.

This video follows Shoyan as they build a straight staircase with a landing. They discuss the benefits of using pine for staircases and demonstrate their process for cutting, fitting, and securing the stringers, treads, and risers. The video also highlights some unique design elements, such as the landing's access from both sides.

This video follows Shoyan as they install flooring on the first floor of a new build. They begin by installing a unique entrance sill called a kamachi, then move on to laying knotty Hinoki cypress floorboards. The video highlights the challenges of working with these unique floorboards and the creative solutions Shoyan uses to overcome them.

Shoyan is building a 5-meter-long box eave above a sliding glass door. They encounter a pair of swallows who nest in the house, and one gets trapped inside. Shoyan also explains the ventilation system and how they build the soffit frame. They encounter a challenge when installing the box eave, but they manage to complete it before it starts raining.

This episode focuses on insulation and air-sealing techniques for a new house. The builder carefully installs fiberglass insulation and an airtight membrane, emphasizing the importance of using high-quality materials and proper installation techniques. They also conduct an airtightness test to ensure the house is well-sealed and energy-efficient.

This episode of New Build Season 5 focuses on installing the door and window frames in a modern house. The builder explains how the order of construction has changed, with diagonal braces now being installed over the subfloor, and discusses the benefits of this new approach. They also highlight the unique features of the front door, including its unusual blue color and electronic lock.

This video details the crucial interior work on a new build. It covers fastening hardware, insulating the foundation for airtightness, and laying the subfloor. The carpenter explains the importance of each step for structural integrity, heat retention, and preventing future issues like creaking floors, highlighting the meticulous details involved in traditional Japanese carpentry.

This video follows a carpenter as they prepare for framing a new house. They hand-plane exposed pine beams, cut tenons for porch columns, and prepare hardware. The carpenter also discusses the importance of using a UNIC truck for unloading timber and the increased use of hardware for earthquake resistance.

This episode of "New Build Season 5" focuses on the installation of sills, a crucial step in carpentry. The video follows Shoyan as they meticulously position and secure the sills on the foundation, ensuring a strong and level base for the house. The process involves careful measurements, marking, and drilling, highlighting the importance of precision in construction.

This video follows a carpenter in Japan as they build a raised Japanese-style room. The focus is on the installation of a large, custom-made threshold (shikii) that will accommodate three sliding shoji screens. The carpenter explains the unique challenges of working with such a wide threshold and the traditional techniques used to create a seamless and functional entrance.

This video follows a carpenter in Japan as they build a custom entrance storage unit and an in-wall TV storage box. The carpenter uses laminated wood for the project, explaining the benefits of this material and how they work with it. The video showcases the detailed process of building the cabinets, including cutting, assembling, and installing them.

This video follows a carpenter in Japan as they install a large porch ceiling and cedar siding. The carpenter details their process, including preparing the wood, building the frame, and securing the siding. They also discuss the importance of using specific materials and techniques to ensure a durable and aesthetically pleasing finish.

This episode features a carpenter building a multi-functional study desk and bench made of ash wood. They also construct a pony wall with a bookcase for a staircase, ensuring safety and storage. The video showcases the meticulous craftsmanship and attention to detail involved in creating these custom pieces.

This video follows a Japanese carpenter as they install a funazoko ceiling, which resembles an upside-down boat. The carpenter explains the unique features of this ceiling style and demonstrates how to install the ridge beam, frame, and cedar planks. The video also highlights the importance of categorizing the planks by color for a visually appealing result.

Shoyan, a carpenter based in Japan, builds a 14-step staircase using pine wood. The video follows the process from measuring and cutting the wood to installing the treads and risers. Shoyan shares tips and techniques for building a sturdy and beautiful staircase, highlighting the challenges of working with pine wood and the importance of careful measurements.

Shoyan, a carpenter based in Japan, installs Japanese cypress floorboards in a house. They face challenges with the floorboards' thickness variation and the plywood underlay, which requires different techniques compared to traditional joists. Shoyan also highlights the difficulties of installing crawlspace access panels, which they find particularly unpleasant.

This video follows a carpenter in Japan as they install eaves soffits, known as nokiten. The process involves framing, installing ventilation materials, and securing thin trims before finally installing the nokiten planks. The carpenter highlights the challenges of working with different roof sections, particularly around the valley rafters.

This video follows a carpenter in Japan as they insulate the walls and roof of a house. They use glass wool and an air barrier membrane to create a well-insulated and airtight space. The carpenter shares their experience with a new insulation cutting tool and the challenges of installing the air barrier membrane.

This video follows a Japanese carpenter as they insulate the floor of a house. They use a unique method of insulation and plywood underlayment, which they explain in detail. The carpenter also discusses the differences between traditional and modern floor construction techniques.

This video follows a carpenter in Japan as they install sliding glass door frames, level sleepers, and prepare the site for the plumber's arrival. The carpenter emphasizes the importance of a clean job site and demonstrates how to use various tools and techniques to ensure a smooth and efficient workflow.

The video provides a detailed look into the traditional Japanese carpentry process of "tatemae" or framing, highlighting the critical steps involved in erecting the main structure of a house.

This video follows a carpenter in Japan as they prepare for the framing of a house. They process and plane timbers, including pillars and exposed beams, and install the columns and lintels. The carpenter explains the importance of precise measurements and the traditional customs surrounding framing days in Japan.

Shoyan, a Japanese carpenter, begins Season 4 by installing sill plates for a new house. He meticulously prepares the foundation, adjusts anchor bolts, and drills precise holes in the sills. He also incorporates continuous perimeter foundation vents and installs sleepers, concluding with the tightening of all components.

Installing my Favorite Kamoi | The Interior Joinery Work Is Almost Complete!

It was difficult to build the cabinets because the tools for carpenters and cabinetmakers are completely different. However, since they fit perfectly and join well, it's a good idea to install them before painting the wall.

It's the first time I’ve ever built a catwalk and made a curved handrail. However, it turned out well! It was hard to make the plan for the whole job.

I haven't built 14 straight stairs to the second floor in a while. This is the first time a plaster riser has been used instead of solid wood. It will be challenging work for the plasterer.

This size of study desk is rarely seen. The weight caused a lot of difficulty in carrying this 3.6m by 60cm (11ft 9.7in by 2ft) ash board. The stairwell is becoming increasingly dynamic. The catwalk will also be built here!

The Cypress-Scented House! Shikii, Flooring, and Entrance Kamachi Installation

You may think that installing a ceiling would cause neck pain, but in my case, it hurts my legs. It would be easier to install if I built a scaffold at the right height. When I get back home, my legs cramp up because I go up and down so much.

It is nice and spacious to have a porch measuring 1.8 meters squared. It was great to be able to miter corners on the first try!

My hands always hurt when I work on insulation. I told a young carpenter that my fingerprints disappeared after insulation work. He advised me to use gloves.

Last time, the framing was finally completed. Today is the next day; I will begin working inside the house. In the aftermath of a major earthquake or disaster, building standards law requires more hardware each year. But this makes the house stronger!

Finally, it’s time for framing. It is a special day called “tatemae” in Japan. People involved in the construction gather and pray for the safe completion of the work. During framing, I have to move around a lot, which exhausts my legs and back. Young carpenters are a huge help.

Framing will begin tomorrow. When the timber frames are transported to the site, I always participate. This is an important step.

Now that the second season is over, we have moved onto the new site: Season 3! This time, I will share the sill plate installation, which I’ve never shared before! There is a Japanese saying: "A house cannot be built without a foundation." As the saying suggests, if the sill plates are shifted, a house will also be shifted.

The house is getting closer to completion. Entrances have been changed in many styles over time. Nowadays, small entrance is common.

I build a room in addition to the last time when I built a study. I used plenty of high-grade boards to build a walk-in closet. Nowadays, a walk-in closet is indispensable for a new house.

The study has been built, and the carpentry work on the second floor is almost complete. The desk is made of laminated Japanese ash, and the shelves are made of laminated Japanese cypress. Because it was custom-made for the client, I think it was designed to be easy to use.

Finally, the pony wall has been installed, and the staircase is complete. I still need to install another handrail later. The pony wall seemed easy to install, but it didn’t fit well and I had trouble making good progress.

Exposed pillars are becoming increasingly rare, so I need to use other exposed wood to make door frames. I’ll work hard to install a kamoi*, even as part of a door frame. *Kamoi: a head jamb with tracks for a sliding door.

It is becoming less and less common to build window frames for an entire house from solid wood. I had planned to make a video with the door frame, but it turned out to be longer than expected, so I divided it into two videos. I always have difficulty fitting the sliding glass door frame alone because it is so large. If only I were 5 cm (1.97”) taller, I could easily install it. The frame was only one and a half ken (2.72 m / 8’ 11”), so there was no problem, but if it was two ken (3.64 m / 11’ 11”), it will sink in the middle and be even more difficult to install.

*In the subtitle, the dimensions were incorrect. These are the correct dimensions: 00:48 | 30 square mm piece of wood (1 3/16") 02:29 | 4 square cm (1 37/64") 02:33 | 4 square cm (1 37/64") square 10:45 | 40mm square (1 37/64")

To make a structure that doubles as both a floor and a ceiling, a 30 mm (1.18”) joistless material* must be used. It’s an unusual construction. *Joistless material: A material for construction method using no joist.

After about a week, the splendid local pine staircase had been constructed. The woodstove will be installed next to the staircase. It must be a stylish stairwell.

Installation of Winder Stairs

I used Japanese cypress flooring on the first floor, and cedar without knots on the second floor. This floorboard's width is a little short, so it took twice as much time as I thought it would. But it turned out very beautiful.

I have installed the entrance stile and the joists under the floor. It seems the cat likes the smell of concrete when it dries. They always walk on it just before drying out. lol Next time, I’ll install the Japanese cypress floor.

I think I’ll be able to take a break at this location after the sash is fitted and the windows can be closed. After installing the noki-ten, my shoulders hurt.

Thank you for your patience! A new building series is about to begin! The framework is already completed. First, I’ll start with the insulation work.

In this video, I finished "tokonoma" that is a Japanese specific space for the ornament. I used the top grade of zelkova. Although it's a small space, it's hard to finish it due to many things to do, and it took a full day.

In this video, I installed door rails called "shikii" and "kamoi" in Japanese. It was difficult to move the columns by jack. I tried to prevent twisting of the materials. Maybe it's rare for you to see this kind of work.

In this video, I'll finish the space that will be finished by tatami later. This space is raised a little, and a storage will be made under the space.I tried to prevent insects to come in and improve insulation. I used Japanese cypress that is a expensive material.

In this video, I’ll make counters for hand wash for restrooms of the first floor and the second floor. I made it a simple straight shape for the first floor. And for second floor, I made it a semicircle shape. The material is ash. It will be beautiful after painting!

This time, we will create a floor that is one step higher than the floor on the second floor, a skip floor. Normally, a skip floor is created on the landing between the 1st and 2nd floors, but this time it is different. Since the bottom and top are open spaces, we will process the handrail to prevent it from falling and create a shared space that can be used by the whole family! The finish is to pull the tatami mat down.

In this video, I'll install a ceiling and a curtain board for indirect lightings. Indirect lightings were popular before. These days, drawing rooms seldom are made, but indirect lightings are getting popular again, This time I made simple shape of it.

This video is a continuation of the last video. I'll make the straight staircases this time. To use natural wood materials, there are a lot of things to do, so it takes a long time. But I like this work. Wood grain of pine material for this staircase is very beautiful.

*In the video, it is explained as a spiral staircase, but the correct word is winder stairs. In this video, I'd like to show you one of the biggest works for carpenters. I'll process the winder stairs of 5 steps manually. If it has only 3 steps, it's not a big deal. But to make 5 steps is hard work. I'll use red pine. I think it will be beautiful.

In this video, I'll install a window hood. Window hoods are to reduce the run right and rain that come to sashes directly. The roof will be finished by covered with tinplates later.

In this video, I'll install 30 mm thick floor boards of Japanese cypress with knags. It was a very hot day after a long rainy season in Japan, so I was really sweaty. Flooring takes time a lot, but I like this work because of sense of accomplishment.

In this video, I'll install stiles. Stiles of cypress can be finished very beautifully. There will be a wood stove, so the shrinkage of materials tends to happen easily. So I did my best to prevent problems due to shrinkages.

In this video, I'll install an unique shaped column of a log. I've been working as a carpenter for 48 years, but I've never experienced this kind of material with many branches. It was really hard to draw the marking and cut out it. It will be very attractive feature.

In this video, I'll finish the beams that I show in my videos before by plane. It's really hard to finish curved or long beams. But by planing, the timbers will get glossy and be waterproof, so that they will be durable.

In this video, I'll make the timber joint called "okkakedaisen-tsugi" This time, I'll use the maximum size of timber for this joint. It takes a lot of efforts to make this joint. I feel fun when I drive in dowels into this joint.

In this video, I'll finish a curved beam. This kind of beam cannot be processed by pre-cut machines. So this time, I'll adjust the shape by chain saw. I have to imagine how to process it in advance, so it's a difficult job. I think this kind of natural shaped materials make a unique atmosphere.